How Repair Double Glazed Windows Became The Hottest Trend In 2023

How to Repair Double Glazed Windows

There are a few telltale indications that your double glazed windows require repair. Water ingress and draughts are obvious indicators of damage to frames of your windows. They must be fixed in the shortest time possible.

Misting may also indicate that your window seals are in need of replacement. Replacing the seals will fix the issue and stop condensation, draughts or leaks.

Broken Panes

Broken glass is among the most common problems that double-glazed windows have to face. While double pane windows are more difficult to break than single pane windows however, accidents can occur and you'll want to repair a damaged window as soon as is possible.

Get rid of any glass fragments that could be in the frame. Don't forget to wear a pair of gloves and eye protection when doing this, as glass can be sharp. Check the floor for any fragments that are not fixed after the shards have been removed. Also, it's a good idea to look for any hooks made of metal that might be holding the panes in place and take them out also.

Once the glass is removed, you'll have to take off the old glazing compound (small fasteners which pin the glass in the frame of the window) and replace them with new ones. It is a long process that requires the use of a few tools. This includes latex glazing putty; metallic glazing points; pliers; a heat gun; and a putty knife.

When removing the old glazing compound and points, it's best to start at the top of the sash, and begin to work your way down. This will stop any wood or paint that is removed that is left in the sash from sticking to the tool. Also, if you remove some of the sash's wood, be sure to employ a chisel, or a utility knife instead of a chemical stripper, since this could cause damage.

Finally, when you're finished ensure that you scrub any wood that's not finished to smooth it. Once the wood is smooth you can seal it using linseed or clear wood sealer. This will help protect it from water and further damage.

There are a few quick fixes that you can try to repair a damaged double-pane window However, these solutions are not a solution to the crack and should only be used as a temporary solution. Utilizing silicone caulk will help seal the gap. However it is crucial to use caulk of high-quality and with the correct application techniques.

Condensation

If you notice any moisture or mist between the panes of glass that you have double glazing it is a sign that your window seal has failed. This can be a serious problem as it prevents the gas or air that acts as an insulation from getting trapped between the two panes.

Fortunately, this can be easily fixed by an expert in double glazing. The window company will take out the window sash as well as the IGU (insulating unit) to address the issue. Then a new gasket will be blown into to form an airtight seal to prevent condensation from happening again. They'll also employ a drying agent to help dry the area and prevent the condensation from happening again.

Another reason you might notice a misty appearance between the glass panes of windows with double glazing is because the framework has shifted over time, which causes cracks in the all-important seal. This can be a major issue since it means that your windows won't work correctly and will lose energy efficiency.

Although it is possible to replace panes of a double-glazed Windows, this can be very expensive and is usually only required in the event of serious issues with the window that is beyond repair. If you've noticed an issue with your double-glazed windows, and you're still within the warranty period and the window is still in good condition, it might be possible to have the issue fixed for free or at least at a lesser cost.

Review your warranty's terms prior to contacting the company to determine if they can resolve the issue without having to replace the entire window. Double glazed windows are generally covered by warranties of between 10 and 20 years, so you might find that they can repair the damaged window units rather than replacing them completely. If this is the case, they will likely send out a specialist to fix your double-glazed windows. They usually can accomplish this in a short time. This is a cheaper alternative to buying and installing new double-glazed windows. It's also better for the environment!

Broken Locks & Handles

It can be a huge issue if the handle of your window is broken, or if it is difficult to open. You won't be able to use your windows. This also gives burglars the opportunity to gain entry into your home. There are a few ways to fix it however the most effective method is to call a uPVC expert. Depending on the severity of the problem they will usually be able to fix it for you, or at least provide you with a new handle.

There are a few different kinds of window locks, however, the most well-known is the Maco or Mila locks that are commonly found on uPVC frames. These locks lock with rods that resemble bayonets, which could easily jam. If this occurs, the handle's nose will remain in the popped out position and won't be able to return to the locked position wedged. This could be a difficult issue, but it is able to be resolved by following a few steps.

To fix the issue, you will need to first take off the handle, which is easy enough using a screwdriver. After the handle is removed, you should then be aware of the screws holding the lock to the frame. After the screws have been removed, you can try to grab the bolts using a wrench or pair of pliers. If this fails then you can put the tool into the gap between the frame and the window (the gap could be different at the ends of the windows) and make an "u" shape with your hand to grab the bolts.

If you manage to unblock the bolts that shoot, then you can close your window by moving the handle into the closed position. The gearbox (espag, espagnolette, etc.) is most likely damaged, so it will not open when you pull the handle. It is possible to repair the gearbox without the shoot bolts which means that the window can be opened with the handle (and will still be secure) however, you'll require an entirely new handle and gearbox.

Broken Hinges

If your uPVC window hinges aren't longer operating smoothly it is possible to repair or replace them. It could be because the window was opened too tightly or the hinge snapped. It could also be that they have a flaw. It's easy to replace the hinge, which means you don't have to buy new windows.

First, you'll need take off the hinges that are currently in place. This is done by unscrewing the screws that hold the hinges to the frame. After you've removed your hinges, you can replace them with plywood boards that are cut to the right dimensions. Make sure that the plywood is thicker than the original board to ensure it can support the weight of the window when shut and open. Use wood filler to ensure the hole left behind by the hinge of the past will not leak or become loose.

After you've re-installed the hinges and filled in the holes, you'll need paint them. Be sure to employ a top-quality paint to ensure that it will last for as long as possible. When the paint is dry, you can re-attach the window and tighten any loose screws.

Window hinges also require regular maintenance. You can make them last longer by cleaning them regularly on the tracks of friction and lubricating the hinge mechanism. You can also apply wood preservatives to protect them against the elements. This will prevent rusting and keep them looking good for the longest time you can.

Double-glazed windows are more energy-efficient than single-glazed ones, and can help you save money on heating. But, just like  double glazing repair  of your home, your windows are susceptible to wear and tear and may require repair or replacement over time. Our Preston experts are able to assist you if there are signs that your double-glazed windows aren't functioning correctly.